Unplug Soundbar, wait 10 seconds, and plug it back in. When reconnected to your TV, use the remote to access the TV sound settings. Find the Sound submenu and the Sound Out. Ensure the Sound is set to LG Sound Sync and not the TV. Select the correct device (either by wireless, Bluetooth, or physical connection). Your LG Smart TV should immediately connect to a wired network. Also read the last but least solution of fixing problem of LG TV keeps disconnecting from Wifi. 8. Check For Updates. This last but not least can solve the problem of LG TV keeps disconnecting from Wifi. LG software, like smartphone software, must be updated. Turn off your lg tv stand by 30 seconds then at that point plug back in and have a go at reconnecting with the wifi organization. Select Wi-Fi Direct and then select On. Accessing WiFi from your Home Menu. Select Yes to sends a connection request from your Smart TV to the smartphone. Choose the menu Network and in the submenu Wi-Fi Direct. Wi-Fi settings might automatically change due to an unstable Wi-Fi network, and that would lead to the result that LG TV says Wi-Fi is turned off, so checking the Wi-Fi settings is necessary. To reach the settings page and re-link to your Wi-Fi network, follow these steps: 1. Press the settings button with gear icon on your remote control. 2. HDMI Connection: Try replacing the HDMI cable between your TV and soundbar (I suggest using an HDMI 2.1 cable, as it will support both HDMI ARC and eARC). If possible, set up an optical or AUX connection to narrow down the problem. Optical or AUX Connection: Turn down your soundbar and crank the audio on your TV. . 1. Check Audio Level. Check that the audio levels on your LG TV and other Apple devices are not set to zero. 2. Be Sure Both Devices Are Connected to the Same Wi-Fi Network. To use AirPlay, the LG Smart TV and iOS device must be connected to the same internet network. In the Picture Size menu, select Direct or Just-Fit. This will tell your TV to show off any video it gets from your connected device as it receives it, without stretching or cropping anything Tv model info: 43UJ6300-UA, manufactured Aug 2017. **Sorry for the crap photos/formatting of this post**. Place the tv screen down on a flat surface. Remove all screws from the back of the tv with philips #2. To remove back panel of the tv, start from bottom near the power button. 2. Power Cycle Your LG TV. Often, app problems are caused by random TV software glitches. As with most software problems, the best solution is to turn it off and back on again. However, pressing the power button won’t actually reboot your LG webOS TV. Instead of turning off, your TV enters standby mode when you press the off button. Here’s how to check if your LG TV is properly updated. Open “Settings”, then scroll down to “All Settings”. Scroll down to “General”, then to “About This TV”. Click “Check For Updates”. Optional: Toggle “Allow Automatic Updates”. If a new update is available, a notification will pop up on-screen. Select “Yes” to

lg smart tv wifi turned off problem